$72.00
Motion Sensor Indoor, Pet Immune
Occupancy Sensor alarms when motion is sensed or when the external contact is opened. It is battery powered and requires no installation tools. A PyroflexTM sensor with HighBarTM signal processing allows for industry- leading pet immunity and catch performance.
Features
Industry-leading pet immunity and catch performance
Supports both motion zone and external contact zone
Mountable on walls or in corners
5 year warranty
Supports both motion zone and external contact zone
Mountable on walls or in corners
5 year warranty
| Physical | |
|---|---|
| Housing Dimensions | 3.50 x 2.40 x 1.70 inches (8.9 x 6.1 x 4.3 cm) |
| Weight with Batteries | 3.2 ounces (91 grams) |
| Mounting Fastener | 3MTM VHBTM Tape or Screws (both provided) |
| Environmental | |
| Operational Temperature | 32°F to 120°F (0°C to 49°C) |
| Maximum Humidity | 85% non-condensing relative humidity |
| Sensor Specification | |
| Frequency | 433.92 MHz |
| Battery Life | 6 to 8 years |
| Battery Voltage | 3.0 VDC (Nominal), 2.2 VDC (Low) |
| Current Draw | 30 mA (Maximum), 50 uA (Quiescent) |
| Temperature Accuracy | +/- 2°C |
| Transmitted Indications | Low Battery, Tamper, Supervision, Alarm |
| Certification | |
| RE610P-OS | FCC, IC |
$72.00
Enroll
Enroll by placing the panel into wireless enrollment mode and then sending an enrollment signal from the motion sensor. Alternatively, the motion sensor can be enrolled by scanning its bar code using the Connect+ Installer app or by entering its 8-character serial number on the interactive service provider’s web portal.
Installation
You can easily install the IGuard Indoor motion sensor yourself without the help of professionals.
Clean the surface for mounting and make sure the surface temperature is above 50 °F.
With 3MTM VHBTM tape, mount the motion sensor 7.5 to 9.5 feet from the floor to the wall or in a corner.
Apply the tape backwards when climbing the wall.
If you are installing in the corner, apply the tape to the rear bevels.
However, to mount the screw, remove the cover and circuit board, then try to punch the screw mount hole.
Clean the surface for mounting and make sure the surface temperature is above 50 °F.
With 3MTM VHBTM tape, mount the motion sensor 7.5 to 9.5 feet from the floor to the wall or in a corner.
Apply the tape backwards when climbing the wall.
If you are installing in the corner, apply the tape to the rear bevels.
However, to mount the screw, remove the cover and circuit board, then try to punch the screw mount hole.
Key Points
Count on us to add extra elements to your home or business security. At IGuard, you’ll find everything at an economical price that suits your security needs.
Product Specification Chart
| Physical | |
|---|---|
| Housing Dimensions | 3.50 x 2.40 x 1.70 inches (8.9 x 6.1 x 4.3 cm) |
| Weight with Batteries | 3.2 ounces (91 grams) |
| Mounting Fastener | 3MTM VHBTM Tape or Screws (both provided) |
| Environmental | |
| Operational Temperature | 32°F to 120°F (0°C to 49°C) |
| Maximum Humidity | 85% non-condensing relative humidity |
| Sensor Specification | |
| Frequency | 433.92 MHz |
| Battery Life | 6 to 8 years |
| Battery Voltage | 3.0 VDC (Nominal), 2.2 VDC (Low) |
| Current Draw | 30 mA (Maximum), 50 uA (Quiescent) |
| Temperature Accuracy | +/- 2°C |
| Transmitted Indications | Low Battery, Tamper, Supervision, Alarm |
| Certification | |
| RE610P-OS | FCC, IC |
