+1 (833) 448-2731
3448 N Golden State Blvd, Turlock, CA 95382
Door Window

$34.00

Window Sensor

Smallest full-featured security transmitter in the industry. It is typically used to sense opening and closings of doors and windows but can secure just about anything using its Strip & Stick™ external contact holes. It will alarm when the magnet is pulled away from when the external contact is opened

Features

Quick peel and press mounting
Small profile for a near-invisible look
Most flexible magnet positioning in the industry
Strip & Stick external contact holes
5 year warranty
Physical
Housing Dimensions 1.80 x 0.77 x 0.39 inches (4.6 x 2.0 x 1.0 cm)
Weight with Battery 0.53 ounces (15 grams)
Mounting Fastener 3M VHB Tape
Environmental
Operating Temperature
32 to 120 °F (0 to 49 °C)
Maximum Humidity
85% non-condensing relative humidity
Sensor Specification
Frequency 433.92 MHz
Replacement Battery One Panasonic CR1632
Nominal Battery Life 6 years
Battery Voltage 3.0 VDC (Nominal), 2.62VDC (Low)
Current Draw 20 mA (Maximum), 0.5uA (Quiescent)
Transmitted Indications Cover Tamper, Low Battery, Supervision
Certification
RE622
RE622-CE
UL634, ULC634, ETL, FCC, ICEN 60950-1
EN 300 220, EN 301 489, CE, RCM

$34.00

- +

Enroll

Enroll by placing the panel into wireless enrollment mode and then sending an enrollment signal. Alternatively, can be enrolled by scanning its bar code using the Connect+ Installer App or by entering its 8-character serial number on the interactive service provider’s web portal.
Door Window

Benefits

The IGUARD Door and window sensor is a compact portable device. It is easy to place at windows, doors, and other entrance gates to detect opening and closing. For the reliability of the sensor, the notches on the sensor and magnet must be aligned. It is an additional accessory for the home alarm system. With this device, you can protect a window or door against potential robbers. When your window & door sensor is switched on, it produces a strong sound when an intruder opens a door or window. As a result, the owner will be alerted.

How the door and window sensor works?

This door and window sensor contains two parts. You attach one part at the top of the door or window, the other part on the door frame or window frame. Both parts have a very resistant adhesive layer and screws with which you can easily attach them to the desired surface.3M VHB tape works well if the surface is correctly prepared and strong pressure is applied for more than 10 seconds. Wireless performance is improved when it is installed vertically above the door.
Surface preparation
Clean the surface.
Ensure the increasing surface temperature is above 50 ° F.

Product Specification Chart

Physical
Housing Dimensions 1.80 x 0.77 x 0.39 inches (4.6 x 2.0 x 1.0 cm)
Weight with Battery 0.53 ounces (15 grams)
Mounting Fastener 3M VHB Tape
Environmental
Operating Temperature
32 to 120 °F (0 to 49 °C)
Maximum Humidity
85% non-condensing relative humidity
Sensor Specification
Frequency 433.92 MHz
Replacement Battery One Panasonic CR1632
Nominal Battery Life 6 years
Battery Voltage 3.0 VDC (Nominal), 2.62VDC (Low)
Current Draw 20 mA (Maximum), 0.5uA (Quiescent)
Transmitted Indications Cover Tamper, Low Battery, Supervision
Certification
RE622 RE622-CE UL634, ULC634, ETL, FCC, ICEN 60950-1 EN 300 220, EN 301 489, CE, RCM

Frequently Asked Questions

A window sensor is a piece of security equipment that keeps track of whether a door or window is open or closed. It is an essential part of a complete home security package, and will give you peace of mind in knowing who is coming or going from your house and when. Their simple technology is dependable and reliable, which makes them an ideal addition to any property protection package. How does a window sensor work? A window alarm works similarly to a door alarm, it consists of two pieces. One half contains a magnet while the other piece houses the sensor circuit and security alarm transmitter. The pieces are mounted to different parts of the door or window. One piece remains stationary and is mounted on the frame or molding around the window, and the other piece is mounted to the edge of the moving part of the window. When the window opens, it separates the magnetic contact between the two sections which trips an electrical circuit called a reed switch. When the two halves of the sensor are close enough in contact with each other, the magnetic field is constantly pushing the wires of the reed switch apart. When the window opens, the magnet moves away from the switch, which triggers the device to send an alert to your alarm keypad or home security app. Some brands of home security systems use wired sensors that connect back to a professionally installed control panel but the window and door sensors included in the Cove Home Security System are completely wireless and can be installed by the user in minutes. Because the magnetic field requires no power to maintain, only a little electricity is used when the sensor is triggered, meaning door and window sensors will last for several years on a single battery. Its connection to your Cove Touch Alarm Panel makes it easy to know when and where a door or window has been opened. Cove can even notify you on your smart device. When it’s time to change the batteries for your window alarm sensor, your Cove alarm panel will even be your low battery indicator and alert you.
A window sensor is an essential piece of equipment to have for protecting your home with a security system. You can install several sensors in your home to track multiple doors or windows 24/7. When shopping around for window alarms you have the option of choosing a wired sensor or a wireless one. Although with the simplicity and size of the device, wireless models, like Cove’s, are becoming more and more popular, affordable, and easy to install. Their small size, simple design, and discreet appearance make them blend into the aesthetic of your home. Their unobtrusive form is effectively out of view from outside the window. If your system is armed when a monitored window is opened, a loud alarm will sound, alerting the house to a possible intruder. With the Cove Home Security System, the chances of false alarms are low, because the alarm panel is regularly monitoring the devices for proper function. With a yard sign and window stickers, your chances of a real burglar alarm are even lower. Very rarely do criminals want to mess with a professionally monitored security system
how the products work, and what vulnerabilities exist in your house or apartment. Most burglars come in through the front door, back door, or ground floor windows. You should keep all possible entrances to your home locked, but in the unlikely scenario that you forget to do so before leaving the house, or if an intruder is audacious enough to force their way through anyways, it’s best to have sensors on your doors and windows. Get to know the layout of your house from the outside and how a criminal might be able to access it. Then, when you’re choosing an alarm system you’ll know how many window alarm devices to get, and which other devices to install and where. Window and door alarm sensors work most effectively as part of a multifaceted security system, so you’ll want to bundle your hardware with a single security provider. After that it’s just a matter of finding the package that best fits your needs and budget. A Cove Home Security System can be customized to fit your exact needs. Cove offers not only some of the most affordable and reliable door and window sensors, they also offer motion sensors, carbon monoxide and smoke detectors, glass break sensors, flood or water leak detectors, and more. You can even get the system with a remote control to arm or disarm the system from outside the house, or hit the panic button from your key ring if you can’t get to the alarm panel. Cove’s Home Security System also comes with no contract and simple DIY installation.